Economizer Optimization
Diagnose stuck dampers, faulty enthalpy sensors, and actuator binding in minutes.
System Diagnostics
Commercial RTU Diagnostics Made Manageable
Bring clarity to the roof. Diagnose economizers, phase monitors, and belt-drive blowers without getting lost in the wiring diagram.
ACTIVE_SCAN_MODE
ANALYZING_SYSTEM_DATA...
> DIAGNOSIS_READY
> CONFIDENCE: 98.4%
> VIEW_STEPS_BELOW
> CONFIDENCE: 98.4%
> VIEW_STEPS_BELOW
Built for Precision
Everything you need to diagnose with confidence and accuracy.
Belt-Drive Blower Setup
Properly align sheaves, tension belts, and measure amperage to prevent motor overheating.
3-Phase Power Validation
Verify phase balance, detect single-phasing, and ensure contactor integrity under load.
The Three-Step Workflow
01
Select Configuration
Specify tonnage, voltage, and heating type (gas/electric) for relevant checklists.
02
Follow Commercial Workflow
Prioritized checks for safety circuits, freeze stats, and building automation inputs.
03
Verify System Performance
Confirm supply air temperature, static pressure, and economizer operation.
Simple, Transparent Pricing
Built for independent experts.
Solo Plan
$15 /month
Billing: Perfect for trying it out with a small client base
- AI-Powered Rapid Troubleshooting
- 90-day searchable history
- Professional PDF reports
- Zero-Signal Offline Mode
- 500K tokens per month
Most popular
Standard for growing HVAC shops.
Team Plan
$25 /month /technician
Billing: Scalable solutions for growing teams
- Everything in Solo Plan
- Centralized team management
- Shared diagnostic history and data
- Priority customer support
- 1M tokens per month
Strategic oversight & operations.
Insight Plan
$89 /month /technician
Billing: For leadership and owners
- Everything in Team Plan
- On-Demand Master Tech Consultation
- Enterprise Operations Command Center
- Operational trend reporting
- Custom API & Workflow Integration
- 4M tokens per month
Frequently Asked Questions
The economizer stays open when it's hot outside. How do I fix it?
This usually means a failed enthalpy sensor or a stuck actuator. We guide you through testing the sensor resistance and manual positioning.
I hear a squealing noise on startup. Is it the belt?
Likely. It could be a loose belt or a sheave alignment issue. Our guide helps you measure deflection and check for pulley wear.
The unit trips on high pressure but the condenser is clean. Why?
Check for non-condensables, condenser fan rotation (especially on 3-phase), or a restriction. We help isolate the cause systematically.