Daikin Heat Reclaim Ventilator

Daikin Heat Reclaim Ventilator Error Code 64

Troubleshooting guide for the Daikin Heat Reclaim Ventilator system fault 64.

ACLogics Standardize Heat Reclaim Ventilator diagnostics See the commercial workflow → Standardize Heat Reclaim Ventilator diagnostics

What It Means

Malfunction of indoor air thermistor (Heat reclaim ventilator).

Possible Causes

  • Defective connector contact.
  • Defective indoor air thermistor.
  • Defective control PCB.

Not sure which one it is — or if it's none of these? Try ACLogics today.

Disclaimer: This information is for general reference. Error codes can vary by model and production year. Always refer to your machine's specific manual and the information printed on the unit itself.
New to this code? Click to see why this happens

Full Diagnosis

Malfunction of indoor air thermistor (Heat reclaim ventilator)

All Recorded Causes

Defective connector contact Defective indoor air thermistor Defective control PCB

Verify Before Replacing Parts

  1. Confirm the exact Daikin model family and heat reclaim ventilator context before acting on a generic code description.
  2. Verify the sensor or thermistor reading against the expected range for the current operating condition, keeping in mind that defective connector contact.
  3. Check the sensor harness and board connection before condemning the sensor itself; on Daikin units this is also where you'd confirm defective indoor air thermistor.
  4. After the correction, run the system long enough to confirm the heat reclaim ventilator fault does not return under normal load.

Diagnosing Heat Reclaim Ventilator across a fleet?

ACLogics standardizes commercial Heat Reclaim Ventilator diagnostics across your whole team — consistent steps, less guesswork on every call.

See the commercial workflow →