What It Means
Loss of communication between control board and indoor blower motor.
Lennox All Systems
Lennox Error Code E201
Troubleshooting guide for the Lennox system fault E201.
Possible Causes
- Loose wiring.
- Bad motor.
- Bad control board.
Not sure which one it is — or if it's none of these? Try ACLogics today.
Disclaimer: This information is for general reference. Error codes can vary by model and production year. Always refer to your machine's specific manual and the information printed on the unit itself.
New to this code? Click to see why this happens
Full Diagnosis
Lost Communication with Indoor Blower. The control board cannot communicate with the blower motor.
All Recorded Causes
Loose wiring, bad motor, bad control board.
Verify Before Replacing Parts
- Confirm the exact Lennox model family and e-codes context before acting on a generic code description.
- Confirm board LEDs, wiring polarity, and model compatibility before replacing control boards — this Lennox fault points at loose wiring, bad motor, bad control board.
- Check for intermittent communication faults caused by connectors, moisture, or damaged harnesses, and rule out the next candidate on the list.
- After the correction, run the system long enough to confirm the e-codes fault does not return under normal load.
Not sure which system this Lennox code is on?
ACLogics has guided diagnostics for 16 Lennox fault codes and asks the right questions to narrow it down.
