What It Means
Flame sensor out of sequence with flame detected while gas valve is off.
Lennox All Systems
Lennox Error Code E241
Troubleshooting guide for the Lennox system fault E241.
Possible Causes
- Stuck gas valve.
- Shorted wire.
Not sure which one it is — or if it's none of these? Try ACLogics today.
Disclaimer: This information is for general reference. Error codes can vary by model and production year. Always refer to your machine's specific manual and the information printed on the unit itself.
New to this code? Click to see why this happens
Full Diagnosis
Flame Sensor Out of Sequence. Flame sensed when gas valve should be closed.
All Recorded Causes
Stuck gas valve, shorted wire.
Verify Before Replacing Parts
- Confirm the exact Lennox model family and e-codes context before acting on a generic code description.
- Walk the entire heating sequence in order instead of jumping straight to the reported code, watching for stuck gas valve, shorted wire.
- Verify each safety device and prove where the sequence stops under live operation, including whether the next candidate on the list.
- After the correction, run the system long enough to confirm the e-codes fault does not return under normal load.
Not sure which system this Lennox code is on?
ACLogics has guided diagnostics for 16 Lennox fault codes and asks the right questions to narrow it down.
