What It Means
No 230 V sensed at contactor during a cooling call.
Carrier Air Conditioner
Carrier Air Conditioner Error Code 47
Troubleshooting guide for the Carrier Air Conditioner system fault 47.
Possible Causes
- Open or tripped disconnect switch/breaker.
- Blown high-voltage fuses.
- Faulty contactor coil or supply wiring.
Not sure which one it is — or if it's none of these? Try ACLogics today.
Disclaimer: This information is for general reference. Error codes can vary by model and production year. Always refer to your machine's specific manual and the information printed on the unit itself.
New to this code? Click to see why this happens
Full Diagnosis
No 230 V at Unit. There is no 230 V at the contactor when the indoor unit is powered and a cooling demand exists.
All Recorded Causes
Verify disconnect is closed and properly fused. Check 230 V wiring from disconnect to outdoor unit. Inspect contactor coil operation. Verify fuses or breaker are not tripped.
Verify Before Replacing Parts
- Confirm the exact Carrier model family and air conditioners context before acting on a generic code description.
- Confirm filter condition, blower operation, and coil cleanliness before replacing any controls — start by ruling out whether verify disconnect is closed and properly fused.
- Measure airflow-related readings that match the symptom, such as temperature split or static pressure, and check whether check 230 V wiring from disconnect to outdoor unit.
- After the correction, run the system long enough to confirm the air conditioners fault does not return under normal load.
Still unsure about this fault?
ACLogics walks you through Carrier Air Conditioner diagnostics step-by-step — so you confirm the cause before swapping parts.
