What It Means
Low flame signal detected due to weak flame sensor current.
Lennox All Systems
Lennox Error Code Slow Flash / Fast Flash
Troubleshooting guide for the Lennox system fault Slow Flash / Fast Flash.
ACLogics Fix Lennox code Slow Flash / Fast Flash See how ACLogics handles it → Fix Slow Flash / Fast Flash step-by-step
Possible Causes
- Dirty flame sensor.
- Poor ground.
- Bad wire connection.
Not sure which one it is — or if it's none of these? Try ACLogics today.
Disclaimer: This information is for general reference. Error codes can vary by model and production year. Always refer to your machine's specific manual and the information printed on the unit itself.
New to this code? Click to see why this happens
Full Diagnosis
Low Flame Signal. The flame sensor current is weak.
All Recorded Causes
Dirty flame sensor, poor ground, bad wire connection.
Verify Before Replacing Parts
- Confirm the exact Lennox model family and ds1 & ds2 context before acting on a generic code description.
- Walk the entire heating sequence in order instead of jumping straight to the reported code, watching for dirty flame sensor, poor ground, bad wire connection.
- Verify each safety device and prove where the sequence stops under live operation, including whether the next candidate on the list.
- After the correction, run the system long enough to confirm the ds1 & ds2 fault does not return under normal load.
Not sure which system this Lennox code is on?
ACLogics has guided diagnostics for 16 Lennox fault codes and asks the right questions to narrow it down.
