What It Means
Low-heat pressure switch failed to close or opened during low heat.
Carrier Furnace
Carrier Furnace Error Code 32
Troubleshooting guide for the Carrier Furnace system fault 32.
Possible Causes
- Low-stage inducer speed loss.
- Blocked pressure switch tubing or condensate drain.
- Faulty low-heat pressure switch.
- Restricted flue venting.
Not sure which one it is — or if it's none of these? Try ACLogics today.
Disclaimer: This information is for general reference. Error codes can vary by model and production year. Always refer to your machine's specific manual and the information printed on the unit itself.
New to this code? Click to see why this happens
Full Diagnosis
Low-Heat Pressure Switch Did Not Close or Reopened. Low-heat pressure switch input failed to close on a call for low heat, or opened during low heat.
All Recorded Causes
Check inducer motor speed at low-heat stage. Inspect pressure switch tubing for blockage or leaks. Test low-heat pressure switch with manometer. Verify vent is clear and condensate drain is open.
Verify Before Replacing Parts
- Confirm the exact Carrier model family and furnaces context before acting on a generic code description.
- Walk the entire heating sequence in order instead of jumping straight to the reported code, watching for check inducer motor speed at low-heat stage.
- Verify each safety device and prove where the sequence stops under live operation, including whether inspect pressure switch tubing for blockage or leaks.
- After the correction, run the system long enough to confirm the furnaces fault does not return under normal load.
Still unsure about this fault?
ACLogics walks you through Carrier Furnace diagnostics step-by-step — so you confirm the cause before swapping parts.
