What It Means
Open circuit detected in compressor run winding or faulty compressor wiring.
Goodman All Systems
Goodman Error Code 07
Troubleshooting guide for the Goodman system fault 07.
Possible Causes
- Open compressor run winding.
- Improper wiring between compressor and control board.
- Faulty or damaged compressor wiring harness.
Not sure which one it is — or if it's none of these? Try ACLogics today.
Disclaimer: This information is for general reference. Error codes can vary by model and production year. Always refer to your machine's specific manual and the information printed on the unit itself.
New to this code? Click to see why this happens
Full Diagnosis
Compressor run winding is open./Compressor no properly wired to control./Faulty compressor wiring.
All Recorded Causes
Verify Before Replacing Parts
- Confirm the exact Goodman model family and default context before acting on a generic code description.
- Verify current draw, overload status, and control signal before condemning the compressor or drive, given that the most likely cause listed above.
- Look for upstream conditions such as airflow or charge issues that may be pushing the compressor into protection, and check the next candidate on the list.
- After the correction, run the system long enough to confirm the default fault does not return under normal load.
Not sure which system this Goodman code is on?
ACLogics has guided diagnostics for 20 Goodman fault codes and asks the right questions to narrow it down.
