What It Means
Hard lockout due to repeated open run circuit trips.
Rheem AC & Heat Pump
Rheem AC & Heat Pump Error Code L7
Troubleshooting guide for the Rheem AC & Heat Pump system fault L7.
Possible Causes
- Failed run capacitor.
- Damaged compressor run winding.
- Faulty contactor or wiring connections.
Not sure which one it is — or if it's none of these? Try ACLogics today.
Disclaimer: This information is for general reference. Error codes can vary by model and production year. Always refer to your machine's specific manual and the information printed on the unit itself.
New to this code? Click to see why this happens
Full Diagnosis
Compressor open run circuit lockout.
All Recorded Causes
Open run circuit detected repeatedly. Check run capacitor, compressor run winding, wiring, contactor, and control before resetting.
Verify Before Replacing Parts
- Confirm the exact Rheem model family and ac and heat pump context before acting on a generic code description.
- Verify current draw, overload status, and control signal before condemning the compressor or drive, given that open run circuit detected repeatedly.
- Look for upstream conditions such as airflow or charge issues that may be pushing the compressor into protection, and check check run capacitor, compressor run winding, wiring, contactor, and control before resetti….
- After the correction, run the system long enough to confirm the ac and heat pump fault does not return under normal load.
Not sure which system this Rheem code is on?
ACLogics has guided diagnostics for 57 Rheem fault codes and asks the right questions to narrow it down.
