What It Means
Outdoor ambient temperature sensor T4 is open or short-circuited.
Bryant Ductless Mini-Split
Bryant Ductless Mini-Split Error Code F1
Troubleshooting guide for the Bryant Ductless Mini-Split system fault F1.
Possible Causes
- Damaged or corroded T4 sensor wiring connector.
- T4 thermistor out of resistance specification.
Not sure which one it is — or if it's none of these? Try ACLogics today.
Disclaimer: This information is for general reference. Error codes can vary by model and production year. Always refer to your machine's specific manual and the information printed on the unit itself.
New to this code? Click to see why this happens
Full Diagnosis
Outdoor Ambient Temperature Sensor T4 Open or Short. Outdoor ambient temperature sensor T4 is open-circuit or short-circuit.
All Recorded Causes
Check T4 sensor wiring and connector for damage or corrosion. Measure sensor resistance and compare to temperature/resistance chart. Replace T4 sensor if resistance is outside specifications.
Verify Before Replacing Parts
- Confirm the exact Bryant model family and ductless systems context before acting on a generic code description.
- Confirm filter condition, blower operation, and coil cleanliness before replacing any controls — start by ruling out whether check T4 sensor wiring and connector for damage or corrosion.
- Measure airflow-related readings that match the symptom, such as temperature split or static pressure, and check whether measure sensor resistance and compare to temperature/resistance chart.
- After the correction, run the system long enough to confirm the ductless systems fault does not return under normal load.
Still unsure about this fault?
ACLogics walks you through Bryant Ductless Mini-Split diagnostics step-by-step — so you confirm the cause before swapping parts.
