What It Means
External auxiliary outdoor temperature sensor open or shorted.
American Standard AC & Heat Pump
American Standard AC & Heat Pump Error Code Red 13 Flashes
Troubleshooting guide for the American Standard AC & Heat Pump system fault Red 13 Flashes.
ACLogics Fix American Standard code Red 13 Flashes See how ACLogics handles it → Fix Red 13 Flashes step-by-step
Possible Causes
- Damaged or disconnected auxiliary sensor wiring.
- Faulty external outdoor temperature sensor.
- Control board sensing circuit issue.
Not sure which one it is — or if it's none of these? Try ACLogics today.
Disclaimer: This information is for general reference. Error codes can vary by model and production year. Always refer to your machine's specific manual and the information printed on the unit itself.
New to this code? Click to see why this happens
Full Diagnosis
External outdoor temperature sensor fault (open/shorted).
All Recorded Causes
If an auxiliary outdoor sensor is installed, check its wiring. Replace the sensor if needed. If no separate sensor exists, a technician should examine the control board.
Verify Before Replacing Parts
- Confirm the exact American Standard model family and ac and heat pump context before acting on a generic code description.
- Verify the sensor or thermistor reading against the expected range for the current operating condition, keeping in mind that if an auxiliary outdoor sensor is installed, check its wiring.
- Check the sensor harness and board connection before condemning the sensor itself; on American Standard units this is also where you'd confirm replace the sensor if needed.
- After the correction, run the system long enough to confirm the ac and heat pump fault does not return under normal load.
Not sure which system this American Standard code is on?
ACLogics has guided diagnostics for 36 American Standard fault codes and asks the right questions to narrow it down.
