What It Means
Demand configuration or dip-switch setup mismatch fault.
American Standard AC & Heat Pump
American Standard AC & Heat Pump Error Code Red 16 Flashes
Troubleshooting guide for the American Standard AC & Heat Pump system fault Red 16 Flashes.
ACLogics Fix American Standard code Red 16 Flashes See how ACLogics handles it → Fix Red 16 Flashes step-by-step
Possible Causes
- Incorrect dip switch configuration.
- Firmware or setup mismatch with installed equipment.
Not sure which one it is — or if it's none of these? Try ACLogics today.
Disclaimer: This information is for general reference. Error codes can vary by model and production year. Always refer to your machine's specific manual and the information printed on the unit itself.
New to this code? Click to see why this happens
Full Diagnosis
Demand configuration fault.
All Recorded Causes
Confirm dip switches or firmware settings match the installation manual. This often requires a professional to reconfigure the system.
Verify Before Replacing Parts
- Confirm the exact American Standard model family and ac and heat pump context before acting on a generic code description.
- Start with the exact model documentation and verify the full operating sequence before replacing parts, particularly around confirm dip switches or firmware settings match the installation manual.
- Use the listed causes as branches to confirm or eliminate with measurements, not assumptions — this often requires a professional to reconfigure the system is a reasonable second branch.
- After the correction, run the system long enough to confirm the ac and heat pump fault does not return under normal load.
Not sure which system this American Standard code is on?
ACLogics has guided diagnostics for 36 American Standard fault codes and asks the right questions to narrow it down.
