What It Means
Defrost Fault B (and/or C) detected on the heat pump outdoor unit.
American Standard AC & Heat Pump
American Standard AC & Heat Pump Error Code Red 3 Flashes
Troubleshooting guide for the American Standard AC & Heat Pump system fault Red 3 Flashes.
ACLogics Fix American Standard code Red 3 Flashes See how ACLogics handles it → Fix Red 3 Flashes step-by-step
Possible Causes
- Outdoor fan motor failure during heat mode.
- Outdoor coil icing.
- Defective defrost sensor, ambient sensor, or control module.
Not sure which one it is — or if it's none of these? Try ACLogics today.
Disclaimer: This information is for general reference. Error codes can vary by model and production year. Always refer to your machine's specific manual and the information printed on the unit itself.
New to this code? Click to see why this happens
Full Diagnosis
Defrost Fault B (and/or C).
All Recorded Causes
Verify the outdoor fan is running during heat mode and check for icing. If red 3 blinks continue, have a technician check the defrost sensor, ambient sensor, and control module.
Verify Before Replacing Parts
- Confirm the exact American Standard model family and ac and heat pump context before acting on a generic code description.
- Verify the sensor or thermistor reading against the expected range for the current operating condition, keeping in mind that verify the outdoor fan is running during heat mode and check for icing.
- Check the sensor harness and board connection before condemning the sensor itself; on American Standard units this is also where you'd confirm if red 3 blinks continue, have a technician check the defrost sensor, ambient sensor, and….
- After the correction, run the system long enough to confirm the ac and heat pump fault does not return under normal load.
Not sure which system this American Standard code is on?
ACLogics has guided diagnostics for 36 American Standard fault codes and asks the right questions to narrow it down.
