What It Means
System locked out for 2 hours due to excessive compressor current draw.
Bryant Air Conditioner
Bryant Air Conditioner Error Code 95
Troubleshooting guide for the Bryant Air Conditioner system fault 95.
Possible Causes
- Compressor motor shorted windings or damaged wiring.
- Mechanical binding inside compressor.
- Supply voltage anomaly.
Not sure which one it is — or if it's none of these? Try ACLogics today.
Disclaimer: This information is for general reference. Error codes can vary by model and production year. Always refer to your machine's specific manual and the information printed on the unit itself.
New to this code? Click to see why this happens
Full Diagnosis
High Current Lockout. High-current lockout active for 2 hours.
All Recorded Causes
Check supply voltage for proper level. Inspect compressor wiring for shorts. Test compressor winding resistance. Check for mechanical blockage in compressor. Diagnose root cause before resetting. Lockout clears after 2 hours.
Verify Before Replacing Parts
- Confirm the exact Bryant model family and air conditioners context before acting on a generic code description.
- Verify current draw, overload status, and control signal before condemning the compressor or drive, given that check supply voltage for proper level.
- Look for upstream conditions such as airflow or charge issues that may be pushing the compressor into protection, and check inspect compressor wiring for shorts.
- After the correction, run the system long enough to confirm the air conditioners fault does not return under normal load.
Still unsure about this fault?
ACLogics walks you through Bryant Air Conditioner diagnostics step-by-step — so you confirm the cause before swapping parts.
