What It Means
High compressor motor operating torque detected.
Bryant Air Conditioner
Bryant Air Conditioner Error Code 98
Troubleshooting guide for the Bryant Air Conditioner system fault 98.
Possible Causes
- Mechanical binding or bearing restriction in compressor.
- High head pressure or refrigerant overcharge.
- Abnormal inverter drive output waveform.
Not sure which one it is — or if it's none of these? Try ACLogics today.
Disclaimer: This information is for general reference. Error codes can vary by model and production year. Always refer to your machine's specific manual and the information printed on the unit itself.
New to this code? Click to see why this happens
Full Diagnosis
High Torque Event. High-torque event detected.
All Recorded Causes
Check for mechanical binding or blockage in the compressor. Inspect refrigerant charge and system pressures. Verify supply voltage is within specification. Check inverter drive output waveform. Board retries after 10 minutes.
Verify Before Replacing Parts
- Confirm the exact Bryant model family and air conditioners context before acting on a generic code description.
- Confirm board LEDs, wiring polarity, and model compatibility before replacing control boards — this Bryant fault points at check for mechanical binding or blockage in the compressor.
- Check for intermittent communication faults caused by connectors, moisture, or damaged harnesses, and rule out inspect refrigerant charge and system pressures.
- After the correction, run the system long enough to confirm the air conditioners fault does not return under normal load.
Still unsure about this fault?
ACLogics walks you through Bryant Air Conditioner diagnostics step-by-step — so you confirm the cause before swapping parts.
