Daikin VRV

Daikin VRV Error Code C6

Troubleshooting guide for the Daikin VRV system fault C6.

ACLogics Standardize VRV diagnostics See the commercial workflow → Standardize VRV diagnostics

What It Means

Malfunction of fan motor sensor or fan control driver.

Possible Causes

  • Defective fan PCB.
  • Defective connection of capacity setting adaptor.
  • Field setting error.

Not sure which one it is — or if it's none of these? Try ACLogics today.

Disclaimer: This information is for general reference. Error codes can vary by model and production year. Always refer to your machine's specific manual and the information printed on the unit itself.
New to this code? Click to see why this happens

Full Diagnosis

Malfunction of fan motor sensor or fan control driver

All Recorded Causes

Defective fan PCB Defective connection of capacity setting adaptor Field setting error

Verify Before Replacing Parts

  1. Confirm the exact Daikin model family and vrv context before acting on a generic code description.
  2. Verify the sensor or thermistor reading against the expected range for the current operating condition, keeping in mind that defective fan PCB.
  3. Check the sensor harness and board connection before condemning the sensor itself; on Daikin units this is also where you'd confirm defective connection of capacity setting adaptor.
  4. After the correction, run the system long enough to confirm the vrv fault does not return under normal load.

Diagnosing VRV across a fleet?

ACLogics standardizes commercial VRV diagnostics across your whole team — consistent steps, less guesswork on every call.

See the commercial workflow →