Daikin Chiller

Daikin Chiller Error Code 8F

Troubleshooting guide for the Daikin Chiller system fault 8F.

ACLogics Standardize Chiller diagnostics See the commercial workflow → Standardize Chiller diagnostics

What It Means

System No.

Possible Causes

  • Defective connector contact.
  • Defective suction pipe thermistor.

Not sure which one it is — or if it's none of these? Try ACLogics today.

Disclaimer: This information is for general reference. Error codes can vary by model and production year. Always refer to your machine's specific manual and the information printed on the unit itself.
New to this code? Click to see why this happens

Full Diagnosis

System No. 1 Malfunction of suction pipe thermistor 2 for heating

All Recorded Causes

Defective connector contact Defective suction pipe thermistor

Verify Before Replacing Parts

  1. Confirm the exact Daikin model family and chiller context before acting on a generic code description.
  2. Verify the sensor or thermistor reading against the expected range for the current operating condition, keeping in mind that defective connector contact.
  3. Check the sensor harness and board connection before condemning the sensor itself; on Daikin units this is also where you'd confirm defective suction pipe thermistor.
  4. After the correction, run the system long enough to confirm the chiller fault does not return under normal load.

Diagnosing Chiller across a fleet?

ACLogics standardizes commercial Chiller diagnostics across your whole team — consistent steps, less guesswork on every call.

See the commercial workflow →