Daikin Chiller

Daikin Chiller Error Code P4

Troubleshooting guide for the Daikin Chiller system fault P4.

ACLogics Standardize Chiller diagnostics See the commercial workflow → Standardize Chiller diagnostics

What It Means

Malfunction of radiation fin temperature sensor.

Possible Causes

  • Defective radiation fin temperature thermistor.
  • Defective inverter PCB.
  • Defective INV.
  • compressor.
  • Defective fan motor.

Not sure which one it is — or if it's none of these? Try ACLogics today.

Disclaimer: This information is for general reference. Error codes can vary by model and production year. Always refer to your machine's specific manual and the information printed on the unit itself.
New to this code? Click to see why this happens

Full Diagnosis

Malfunction of radiation fin temperature sensor

All Recorded Causes

Defective radiation fin temperature thermistor Defective inverter PCB Defective INV. compressor Defective fan motor

Verify Before Replacing Parts

  1. Confirm the exact Daikin model family and chiller context before acting on a generic code description.
  2. Confirm board LEDs, wiring polarity, and model compatibility before replacing control boards — this Daikin fault points at defective radiation fin temperature thermistor.
  3. Check for intermittent communication faults caused by connectors, moisture, or damaged harnesses, and rule out defective inverter PCB.
  4. After the correction, run the system long enough to confirm the chiller fault does not return under normal load.

Diagnosing Chiller across a fleet?

ACLogics standardizes commercial Chiller diagnostics across your whole team — consistent steps, less guesswork on every call.

See the commercial workflow →