What It Means
Abnormal hot water high temperature.
Daikin Chiller
Daikin Chiller Error Code 8H
Troubleshooting guide for the Daikin Chiller system fault 8H.
ACLogics Standardize Chiller diagnostics See the commercial workflow → Standardize Chiller diagnostics
Possible Causes
- Three way valve malfunction.
- Defective thermistor.
- Defect of water temperature setting.
Not sure which one it is — or if it's none of these? Try ACLogics today.
Disclaimer: This information is for general reference. Error codes can vary by model and production year. Always refer to your machine's specific manual and the information printed on the unit itself.
New to this code? Click to see why this happens
Full Diagnosis
Abnormal hot water high temperature
All Recorded Causes
Three way valve malfunction Defective thermistor Defect of water temperature setting
Verify Before Replacing Parts
- Confirm the exact Daikin model family and chiller context before acting on a generic code description.
- Verify the sensor or thermistor reading against the expected range for the current operating condition, keeping in mind that three way valve malfunction.
- Check the sensor harness and board connection before condemning the sensor itself; on Daikin units this is also where you'd confirm defective thermistor.
- After the correction, run the system long enough to confirm the chiller fault does not return under normal load.
Diagnosing Chiller across a fleet?
ACLogics standardizes commercial Chiller diagnostics across your whole team — consistent steps, less guesswork on every call.