What It Means
Malfunction of compressor input (CT) system.
Daikin Split & Multi-Split
Daikin Split & Multi-Split Error Code H8
Troubleshooting guide for the Daikin Split & Multi-Split system fault H8.
Possible Causes
- Defective power transistor.
- Defective reactor.
- Faulty wiring of inverter system.
- Defective outdoor unit PCB.
Not sure which one it is — or if it's none of these? Try ACLogics today.
Disclaimer: This information is for general reference. Error codes can vary by model and production year. Always refer to your machine's specific manual and the information printed on the unit itself.
New to this code? Click to see why this happens
Full Diagnosis
Malfunction of compressor input (CT) system
All Recorded Causes
Defective power transistor Defective reactor Faulty wiring of inverter system Defective outdoor unit PCB
Verify Before Replacing Parts
- Confirm the exact Daikin model family and split/ multi split context before acting on a generic code description.
- Confirm board LEDs, wiring polarity, and model compatibility before replacing control boards — this Daikin fault points at defective power transistor.
- Check for intermittent communication faults caused by connectors, moisture, or damaged harnesses, and rule out defective reactor.
- After the correction, run the system long enough to confirm the split/ multi split fault does not return under normal load.
Still unsure about this fault?
ACLogics walks you through Daikin Split & Multi-Split diagnostics step-by-step — so you confirm the cause before swapping parts.
