What It Means
Indoor unit failed to transmit communication signals to the outdoor unit.
Mitsubishi Electric All Systems
Mitsubishi Electric Error Code E7
Troubleshooting guide for the Mitsubishi Electric system fault E7.
Possible Causes
- Indoor unit signal transmission error.
- Indoor main control board communication circuit fault.
Not sure which one it is — or if it's none of these? Try ACLogics today.
Disclaimer: This information is for general reference. Error codes can vary by model and production year. Always refer to your machine's specific manual and the information printed on the unit itself.
New to this code? Click to see why this happens
Full Diagnosis
Error detail Indoor/outdoor unit transmission error (transmitting error). Inspected unit Indoor.
All Recorded Causes
Verify Before Replacing Parts
- Confirm the exact Mitsubishi Electric model family and default context before acting on a generic code description.
- Start with the exact model documentation and verify the full operating sequence before replacing parts, particularly around the most likely cause listed above.
- Use the listed causes as branches to confirm or eliminate with measurements, not assumptions — the next candidate on the list is a reasonable second branch.
- After the correction, run the system long enough to confirm the default fault does not return under normal load.
Not sure which system this Mitsubishi Electric code is on?
ACLogics has guided diagnostics for 73 Mitsubishi Electric fault codes and asks the right questions to narrow it down.
