What It Means
Indoor unit operation LED blink code for coil frost/overheat mode.
Mitsubishi Electric All Systems
Mitsubishi Electric Error Code LED P6
Troubleshooting guide for the Mitsubishi Electric system fault LED P6.
Possible Causes
- Indoor coil frost or overheating protection mode active.
- Evaporator coil temperature anomaly.
Not sure which one it is — or if it's none of these? Try ACLogics today.
Disclaimer: This information is for general reference. Error codes can vary by model and production year. Always refer to your machine's specific manual and the information printed on the unit itself.
New to this code? Click to see why this happens
Full Diagnosis
Diagnosis of malfunction Abnormality of the coil frost/overheating protection mode. Inspected unit Indoor.
All Recorded Causes
Verify Before Replacing Parts
- Confirm the exact Mitsubishi Electric model family and default context before acting on a generic code description.
- Confirm filter condition, blower operation, and coil cleanliness before replacing any controls — start by ruling out whether the most likely cause listed above.
- Measure airflow-related readings that match the symptom, such as temperature split or static pressure, and check whether the next candidate on the list.
- After the correction, run the system long enough to confirm the default fault does not return under normal load.
Not sure which system this Mitsubishi Electric code is on?
ACLogics has guided diagnostics for 73 Mitsubishi Electric fault codes and asks the right questions to narrow it down.
