What It Means
Outdoor board LED flash diagnostic for power reverse phase detection.
Mitsubishi Electric All Systems
Mitsubishi Electric Error Code LED LD1
(Flash)
Troubleshooting guide for the Mitsubishi Electric system fault LED LD1 (Flash).
ACLogics Fix Mitsubishi Electric code LED LD1 (Flash) See how ACLogics handles it → Fix LED LD1 (Flash) step-by-step
Possible Causes
- Incoming power reverse phase sequence detected.
- Power supply wiring phase rotation error.
Not sure which one it is — or if it's none of these? Try ACLogics today.
Disclaimer: This information is for general reference. Error codes can vary by model and production year. Always refer to your machine's specific manual and the information printed on the unit itself.
New to this code? Click to see why this happens
Full Diagnosis
Reverse phase detect
All Recorded Causes
Verify Before Replacing Parts
- Confirm the exact Mitsubishi Electric model family and default context before acting on a generic code description.
- Start with the exact model documentation and verify the full operating sequence before replacing parts, particularly around the most likely cause listed above.
- Use the listed causes as branches to confirm or eliminate with measurements, not assumptions — the next candidate on the list is a reasonable second branch.
- After the correction, run the system long enough to confirm the default fault does not return under normal load.
Not sure which system this Mitsubishi Electric code is on?
ACLogics has guided diagnostics for 73 Mitsubishi Electric fault codes and asks the right questions to narrow it down.
