What It Means
High pressure trip caused by closed refrigerant service ball valve.
Mitsubishi Electric All Systems
Mitsubishi Electric Error Code UE
Troubleshooting guide for the Mitsubishi Electric system fault UE.
Possible Causes
- Refrigerant liquid or discharge ball valve closed.
- High refrigerant system pressure condition.
Not sure which one it is — or if it's none of these? Try ACLogics today.
Disclaimer: This information is for general reference. Error codes can vary by model and production year. Always refer to your machine's specific manual and the information printed on the unit itself.
New to this code? Click to see why this happens
Full Diagnosis
Error detail High pressure error (ball valve closed)
All Recorded Causes
Verify Before Replacing Parts
- Confirm the exact Mitsubishi Electric model family and default context before acting on a generic code description.
- Verify airflow first, then confirm operating pressures and temperature relationship before adjusting charge, since the most likely cause listed above.
- Look for restrictions, iced coils, or dirty heat-transfer surfaces that can mimic a charge problem, and separately confirm the next candidate on the list.
- After the correction, run the system long enough to confirm the default fault does not return under normal load.
Not sure which system this Mitsubishi Electric code is on?
ACLogics has guided diagnostics for 73 Mitsubishi Electric fault codes and asks the right questions to narrow it down.
