What It Means
Abnormality or fault in the indoor coil thermistor (RT2).
Mitsubishi Electric All Systems
Mitsubishi Electric Error Code P2
Troubleshooting guide for the Mitsubishi Electric system fault P2.
Possible Causes
- Indoor coil thermistor (RT2) abnormality.
- RT2 thermistor harness or connector fault.
Not sure which one it is — or if it's none of these? Try ACLogics today.
Disclaimer: This information is for general reference. Error codes can vary by model and production year. Always refer to your machine's specific manual and the information printed on the unit itself.
New to this code? Click to see why this happens
Full Diagnosis
Abnormality of indoor coil thermistor (RT2)
All Recorded Causes
Verify Before Replacing Parts
- Confirm the exact Mitsubishi Electric model family and default context before acting on a generic code description.
- Confirm filter condition, blower operation, and coil cleanliness before replacing any controls — start by ruling out whether the most likely cause listed above.
- Measure airflow-related readings that match the symptom, such as temperature split or static pressure, and check whether the next candidate on the list.
- After the correction, run the system long enough to confirm the default fault does not return under normal load.
Not sure which system this Mitsubishi Electric code is on?
ACLogics has guided diagnostics for 73 Mitsubishi Electric fault codes and asks the right questions to narrow it down.
