What It Means
Reserved code position in current manufacturer literature.
York All Systems
York Error Code PC
Troubleshooting guide for the York system fault PC.
Possible Causes
- Undefined code position in current product documentation.
- Potential firmware update or model-specific reassignment.
Not sure which one it is — or if it's none of these? Try ACLogics today.
Disclaimer: This information is for general reference. Error codes can vary by model and production year. Always refer to your machine's specific manual and the information printed on the unit itself.
New to this code? Click to see why this happens
Full Diagnosis
This code position is marked "Reserve" in current York documentation, meaning no fault meaning has been assigned to it as of this literature revision. If a unit is genuinely displaying this code, double-check the reading against that specific model's service manual, since reserved code positions are occasionally reassigned in later firmware or model-year revisions.
All Recorded Causes
Not a defined fault in current documentation — recheck the code reading against the unit's model-specific manual.
Verify Before Replacing Parts
- Confirm the exact York model family and default context before acting on a generic code description.
- Verify current draw, overload status, and control signal before condemning the compressor or drive, given that not a defined fault in current documentation — recheck the code reading against the unit's….
- Look for upstream conditions such as airflow or charge issues that may be pushing the compressor into protection, and check the next candidate on the list.
- After the correction, run the system long enough to confirm the default fault does not return under normal load.
Not sure which system this York code is on?
ACLogics has guided diagnostics for 60 York fault codes and asks the right questions to narrow it down.
