Daikin SkyAir

Daikin SkyAir Error Code CJ

Troubleshooting guide for the Daikin SkyAir system fault CJ.

ACLogics Standardize SkyAir diagnostics See the commercial workflow → Standardize SkyAir diagnostics

What It Means

Room temperature thermistor in remote controller abnormality.

Possible Causes

  • Defective room temperature thermistor in remote controller Defective remote controller PCB.
  • External factor (Noise etc.).

Not sure which one it is — or if it's none of these? Try ACLogics today.

Disclaimer: This information is for general reference. Error codes can vary by model and production year. Always refer to your machine's specific manual and the information printed on the unit itself.
New to this code? Click to see why this happens

Full Diagnosis

Room temperature thermistor in remote controller abnormality

All Recorded Causes

Defective room temperature thermistor in remote controller Defective remote controller PCB External factor (Noise etc.)

Verify Before Replacing Parts

  1. Confirm the exact Daikin model family and skyair context before acting on a generic code description.
  2. Verify the sensor or thermistor reading against the expected range for the current operating condition, keeping in mind that defective room temperature thermistor in remote controller Defective remote controller PCB.
  3. Check the sensor harness and board connection before condemning the sensor itself; on Daikin units this is also where you'd confirm external factor (Noise etc.).
  4. After the correction, run the system long enough to confirm the skyair fault does not return under normal load.

Diagnosing SkyAir across a fleet?

ACLogics standardizes commercial SkyAir diagnostics across your whole team — consistent steps, less guesswork on every call.

See the commercial workflow →