What It Means
Malfunction of thermal storage tank water level.
Daikin SkyAir
Daikin SkyAir Error Code HJ
Troubleshooting guide for the Daikin SkyAir system fault HJ.
ACLogics Standardize SkyAir diagnostics See the commercial workflow → Standardize SkyAir diagnostics
Possible Causes
- Low water level.
- Defective switch setting.
- Water level detecting sensor failure.
- Defective connector contact.
Not sure which one it is — or if it's none of these? Try ACLogics today.
Disclaimer: This information is for general reference. Error codes can vary by model and production year. Always refer to your machine's specific manual and the information printed on the unit itself.
New to this code? Click to see why this happens
Full Diagnosis
Malfunction of thermal storage tank water level
All Recorded Causes
Low water level Defective switch setting Water level detecting sensor failure Defective connector contact
Verify Before Replacing Parts
- Confirm the exact Daikin model family and skyair context before acting on a generic code description.
- Verify the sensor or thermistor reading against the expected range for the current operating condition, keeping in mind that low water level.
- Check the sensor harness and board connection before condemning the sensor itself; on Daikin units this is also where you'd confirm defective switch setting.
- After the correction, run the system long enough to confirm the skyair fault does not return under normal load.
Diagnosing SkyAir across a fleet?
ACLogics standardizes commercial SkyAir diagnostics across your whole team — consistent steps, less guesswork on every call.