What It Means
Malfunction of inverter radiation fin temperature rise.
Daikin Packaged Unit
Daikin Packaged Unit Error Code L4
Troubleshooting guide for the Daikin Packaged Unit system fault L4.
Possible Causes
- Fin temperature rise due to short circuit.
- Defective fin thermistor.
Not sure which one it is — or if it's none of these? Try ACLogics today.
Disclaimer: This information is for general reference. Error codes can vary by model and production year. Always refer to your machine's specific manual and the information printed on the unit itself.
New to this code? Click to see why this happens
Full Diagnosis
Malfunction of inverter radiation fin temperature rise
All Recorded Causes
Fin temperature rise due to short circuit Defective fin thermistor
Verify Before Replacing Parts
- Confirm the exact Daikin model family and packaged context before acting on a generic code description.
- Confirm board LEDs, wiring polarity, and model compatibility before replacing control boards — this Daikin fault points at fin temperature rise due to short circuit.
- Check for intermittent communication faults caused by connectors, moisture, or damaged harnesses, and rule out defective fin thermistor.
- After the correction, run the system long enough to confirm the packaged fault does not return under normal load.
Still unsure about this fault?
ACLogics walks you through Daikin Packaged Unit diagnostics step-by-step — so you confirm the cause before swapping parts.
