What It Means
nverter instantaneous overcurrent (DC output).
Daikin Packaged Unit
Daikin Packaged Unit Error Code L5
Troubleshooting guide for the Daikin Packaged Unit system fault L5.
Possible Causes
- Defective compressor coil (such as wiring disconnection or insulation failure).
- Compressor startup failure (mechanical lock) Defective inverter PCB.
Not sure which one it is — or if it's none of these? Try ACLogics today.
Disclaimer: This information is for general reference. Error codes can vary by model and production year. Always refer to your machine's specific manual and the information printed on the unit itself.
New to this code? Click to see why this happens
Full Diagnosis
nverter instantaneous overcurrent (DC output)
All Recorded Causes
Defective compressor coil (such as wiring disconnection or insulation failure) Compressor startup failure (mechanical lock) Defective inverter PCB
Verify Before Replacing Parts
- Confirm the exact Daikin model family and packaged context before acting on a generic code description.
- Confirm board LEDs, wiring polarity, and model compatibility before replacing control boards — this Daikin fault points at defective compressor coil (such as wiring disconnection or insulation failure).
- Check for intermittent communication faults caused by connectors, moisture, or damaged harnesses, and rule out compressor startup failure (mechanical lock) Defective inverter PCB.
- After the correction, run the system long enough to confirm the packaged fault does not return under normal load.
Still unsure about this fault?
ACLogics walks you through Daikin Packaged Unit diagnostics step-by-step — so you confirm the cause before swapping parts.
