What It Means
Malfunction of system.
Daikin Packaged Unit
Daikin Packaged Unit Error Code UH
Troubleshooting guide for the Daikin Packaged Unit system fault UH.
Possible Causes
- Improper connection of transmission wiring between indoor-outdoor units and outdoor-outdoor units.
- Defective indoor unit PCB.
- Defective outdoor unit PCB.
Not sure which one it is — or if it's none of these? Try ACLogics today.
Disclaimer: This information is for general reference. Error codes can vary by model and production year. Always refer to your machine's specific manual and the information printed on the unit itself.
New to this code? Click to see why this happens
Full Diagnosis
Malfunction of system
All Recorded Causes
Improper connection of transmission wiring between indoor-outdoor units and outdoor-outdoor units Defective indoor unit PCB Defective outdoor unit PCB
Verify Before Replacing Parts
- Confirm the exact Daikin model family and packaged context before acting on a generic code description.
- Start with line voltage, low voltage, and board output checks in sequence so the fault is isolated cleanly — the data plate flags improper connection of transmission wiring between indoor-outdoor units and outdoor-outdoo….
- Inspect connectors, relay outputs, and any recently replaced electrical parts for mismatch or loose fit, and verify defective indoor unit PCB.
- After the correction, run the system long enough to confirm the packaged fault does not return under normal load.
Still unsure about this fault?
ACLogics walks you through Daikin Packaged Unit diagnostics step-by-step — so you confirm the cause before swapping parts.
