What It Means
Malfunction of transmission between indoor units.
Daikin Packaged Unit
Daikin Packaged Unit Error Code U6
Troubleshooting guide for the Daikin Packaged Unit system fault U6.
Possible Causes
- Faulty wiring.
- External factor (Noise etc.).
- Defective indoor unit PCB.
Not sure which one it is — or if it's none of these? Try ACLogics today.
Disclaimer: This information is for general reference. Error codes can vary by model and production year. Always refer to your machine's specific manual and the information printed on the unit itself.
New to this code? Click to see why this happens
Full Diagnosis
Malfunction of transmission between indoor units
All Recorded Causes
Faulty wiring External factor (Noise etc.) Defective indoor unit PCB
Verify Before Replacing Parts
- Confirm the exact Daikin model family and packaged context before acting on a generic code description.
- Start with line voltage, low voltage, and board output checks in sequence so the fault is isolated cleanly — the data plate flags faulty wiring.
- Inspect connectors, relay outputs, and any recently replaced electrical parts for mismatch or loose fit, and verify external factor (Noise etc.).
- After the correction, run the system long enough to confirm the packaged fault does not return under normal load.
Still unsure about this fault?
ACLogics walks you through Daikin Packaged Unit diagnostics step-by-step — so you confirm the cause before swapping parts.
