What It Means
Malfunction of overcurrent inverter compressor.
Daikin Packaged Unit
Daikin Packaged Unit Error Code L8
Troubleshooting guide for the Daikin Packaged Unit system fault L8.
Possible Causes
- Compressor overloaded.
- Wiring disconnection in compressor coil Disconnection of compressor wiring.
- Defective inverter PCB.
Not sure which one it is — or if it's none of these? Try ACLogics today.
Disclaimer: This information is for general reference. Error codes can vary by model and production year. Always refer to your machine's specific manual and the information printed on the unit itself.
New to this code? Click to see why this happens
Full Diagnosis
Malfunction of overcurrent inverter compressor
All Recorded Causes
Compressor overloaded Wiring disconnection in compressor coil Disconnection of compressor wiring Defective inverter PCB
Verify Before Replacing Parts
- Confirm the exact Daikin model family and packaged context before acting on a generic code description.
- Confirm board LEDs, wiring polarity, and model compatibility before replacing control boards — this Daikin fault points at compressor overloaded.
- Check for intermittent communication faults caused by connectors, moisture, or damaged harnesses, and rule out wiring disconnection in compressor coil Disconnection of compressor wiring.
- After the correction, run the system long enough to confirm the packaged fault does not return under normal load.
Still unsure about this fault?
ACLogics walks you through Daikin Packaged Unit diagnostics step-by-step — so you confirm the cause before swapping parts.
